Ken Sourounis, Managing Partner
DOTmed user since April 2014
We offer indoor spot chillers for rent. These units come in either 480v 3p or 208v 3p depending on your power requirements. The chiller is capable of chilling a single helium compressor up to 30kW.... view more
An air cooled helium compressor designed to run with RDK-101 and RD-125 coldheads. These are available on exchange. Service Life ... view more
Installed in Toshiba zero boil-off magnets, this compressor drives the RDK-408L2 and RDK-408L3 Coldheads. The F-70 Adsorber should be replaced every 30,000 hours and with each coldhead service to... view more
A water cooled 220V helium compressor designed to operate with RDK series coldheads. These are available on exchange. Service Life ... view more
Installed on Philips 4k magnets, this compressor operates a the RDK-408C2, RDK415C2, RDK408-C3, and RDK-415C3 Coldheads. Sumitomo RDK-408A2 Sumitomo RDK-408 Sumitomo RDK408T Sumitomo RDK-400 ... view more
480v 5.6kW Helium compressor. These are available on exchange. Service Life ... view more
Available as an upgrade to the RW4000 compressor. It offers increased reliability and increased capacity. Sumitomo RDK-408A2 Sumitomo RDK-408 Sumitomo RDK408T Sumitomo RDK-400 Sumitomo RDK-408C2... view more
The Sumitomo CNA-61 is a split system compressor. It allows the heat exchanger to be installed remotely to help manage heat build-up in the equipment... view more
An air cooled helium compressor designed to run with RDK-205D and RDK-205N coldheads. These are available on exchange. Service Life ... view more
Leybold RW-3 Compressor. This is a single phase compressor that can opperate between... view more
Leybold Coolpak6000H desigend to run Leybold coldheads and cryopumps. These are available on exchange. Service Life ... view more
Leybold Coolpak6000H desigend to run Leybold coldheads and cryopumps. These are available on exchange. Service Life ... view more
The CoolPak4000 Compressor is an excellent choice to upgrade an RW4000 compressor. The CoolPak Adsorber should be replaced every 18,000 hours and with each coldhead service to help avoid system... view more
Installed in G.E. S-Series magnets, the Balzers compressors drive the 325-ST, 328-ST, and 065 Balzers coldheads. The Balzers Adsorber should be replaced every 2 years and with each coldhead service... view more
Installed on Philips T5, NT, and F2000 magnets, this compressor drives the APD SC-8, APD SC-8C, and APD SC-8R Coldheads. The HC-8E Adsorber should be replaced every 3 years and with each coldhead... view more